1-218-444-4478
0
Items : 0
Subtotal : $0.00
View CartCheck Out
1-218-444-4478
0
Items : 0
Subtotal : $0.00
View CartCheck Out

WWII Manual Revisions

Why we can never assume that a WWII era military published manual is complete

Does this topic seem unimportant, or boring even? That’s where you’d be wrong! Understanding manual revisions is a key to making correct decisions about maintenance practices, aircraft operation, component overhaul, and more. Many of the questions that I get on a weekly basis at AirCorps Library have direct ties to the revision system that was in place during WWII. I briefly covered revisions in my blog back in October 2019 about the Latest Revision P-51D Manual Sets, but in this post we’re going to get much more detailed!

The “Cover Story”

Understanding the elements of the standard military published cover page is the first key to our discussion. The standard cover can be broken down into four main sections:

1 – Document number

2 – Type of manual

3 – What the manual applies to

4 – Publication and revision information

The image to the right shows a typical cover with these areas circled. For more detailed information on document numbers, check out my blog on the Military TO System. The type of manual can be something specific like a “Parts Catalog” or “Overhaul Manual”, or can cover a variety of things like “Operation, Overhaul, and Service Manual with Parts Catalog”, while the application section indicates what make and model are covered in the manual. 

Prior to 1942 military published manuals had the winged propeller logo on the cover, and the revision information was found at the center bottom of the page. Post 1942, the winged propeller logo was removed and revision info was shifted to the lower right corner of the cover.

Starting With The Basics

When you are thinking about revisions, it is important to make sure that you understand the difference between a “basic” edition manual, and a “revision”. A basic manual can be defined as the first time a manual was published (there is an exception to this definition that I will discuss later). If a manual is a basic edition you will notice that it only has one date in the bottom right corner of the cover. Revisions will have both a basic date, and a revised date, that is printed directly underneath.

A single date on the cover of this C-47 manual indicates that it is a basic edition.
The basic date of this manual is 20-Nov-1944. In smaller font below the basic date, you can see that this cover came with the revision packet that was distributed on 5-Feb-1945.

Revision Packets

During WWII it was not economical to reprint an entirely new manual when only a handful of pages might need to be updated. For this reason, revisions were issued in what I call “revision packets”. Revision packets consisted of only pages that were changed, along with a new cover page that listed the new revision date (this date was also printed on the bottom of each revised page issued in the revision packet).

The idea was that upon receiving a revision packet, the new pages would be inserted into their correct location within the basic edition of that manual, and the old versions of any revised pages were to be removed and destroyed (including the new cover page). This process was ongoing – many manuals were revised multiple times, so, as you look through a manual you will often see a variety of revision dates listed on its pages.

The Pros and Cons of Disorganization

As you might imagine, most mechanics did not follow this system of inserting revised pages to the letter, which has left us today with manuals in a variety of states. Sometimes revised pages and new covers were added correctly, while others were simply placed on top of the basic edition manual they revised. In order for a manual to be considered a latest revision today, it would need to be verified that every page from every single revision packet was inserted into the correct place within the basic manual. Again, see my blog on the Latest Revision P-51D Manuals for information on how to use the “list of revised pages” to accomplish this.

However, there is a definite benefit to the fact that mechanics were not always following strict instructions. If every mechanic would have destroyed past revisions, we would be missing an incredible amount of information today!

Page 46 from this B-25 Structural Repair Manual was originally part of a revision packet that was issued on 5-May-1945 as evidenced by the date on the bottom of the page.

Why Revise?

Pages of manuals were revised for a variety of reasons. Information could have been updated for safety reasons, additional information was added that pertained to newly released models of aircraft or components, and occasionally, entire sections were omitted because they were no longer relevant.

Often, information that has been either changed or omitted is very important in informing maintenance and restoration decisions in our present day shops. For example, it is crucial to know how something worked before it was changed, in order to make a decision about whether the change was made for safety reasons, or if it can be disregarded in order to keep a project historically accurate to a given time period. In our restoration shop, the guys often reference multiple revisions of the same manual to make sure they are seeing the whole picture and making the correct decisions for overhaul and operation of an aircraft or component.

This page is from a late 1950s revision of a P-51 Mustang maintenance manual. Almost 40 pages were removed from this revision because they dealt with crating and shipment of P-51s - something that wasn't actively happening during that time. Imagine all the great information that would have been lost if these pages in every single manual had actually been destroyed as instructed!

How To Spot A Revision

As I mentioned before, most individual pages that have been revised will have their revision date printed in the bottom margin, while pages that are original to the basic edition will have no date. The other way to see specifically what was changed on any given page is to look for black vertical lines in the left and right margin of a revised page. These lines indicate the exact area that was changed from the previous version, and make it very quick and easy to locate changes.

The revision dates in the bottom margin, and the vertical black lines were not implemented 100% of the time during WWII, but is a good rule of thumb for spotting a revised page as a whole. Fun fact, the black vertical line is still used in modern aviation manuals to indicate a change!

Missing Pages & Multiple Copies

I often have AirCorps Library members ask me why there are pages missing from manuals on the website. Other than the fact that many of these manuals are going on 80 years old and could have lost pages along the way, it is more likely that a manual with missing pages is actually just a revision packet! I never intentionally remove pages from a manual when I upload them to the website – I add them just as I receive them. Revisions are also the main reason why you see multiple versions of the same manual on the website. I try to collect as many versions of the same manual that I can, to help fill missing page gaps, and so that AirCorps Library members can see how any given basic manual evolved during the course of its history.

Occasionally, a manual was revised so much that the military decided that they should start fresh and print a whole new manual. All prior revisions would have been included in these “second printings” and would have been re-distributed as a new basic manual, usually with the same document number, and a later basic date.

In Closing

With the information above, it’s easy to see why most WWII era manuals are not complete. Using the “list of effective pages” and the “list of applicable publications” (see P-51 manual blog) for an aircraft or component, it is possible to do the research to determine what the date of a latest revision manual is, but it is equally important to remember that looking at one manual usually isn’t good enough. The more manuals and revisions you’ve looked at for any topic, the better chance you have of making a well informed decision about a restoration, maintenance, or operation question. For example, when I was compiling our latest revision manuals for the P-51, I had to acquire 9 different revisions of the maintenance manual in order to get all the pages that I needed that were the correct dates – not a quick and easy task.

Maybe the best advice I can give is to never assume that purchasing the manual with the latest date listed on the cover is all you need. You never know, it could be incomplete, or you could just be getting a handful of pages from a revision packet!

On this page we can easily see the four specific areas on the page that were revised on 5-May-1945 by looking at the vertical black bars in the margin!
About the author